The design of our tables was developed with head surgery and surgeons in mind. New stable wedge joints eliminate the risk of accessories falling out, even during hours of forceful procedures. Side rails along the entire length of the tabletop give you a choice of accessories for any type of surgery. The easily removable headrest enables stable and quick installation of head positioners from our portfolio. Choose your operating table equipment and customize its functionality for different types of surgeries.
Headrests
Supports the patient’s head in a prone and supine position and has three pivot points that allow you to fully adjust the position for different procedures. A PUR mattress ensures optimal hardness. The headrest is compatible with gel pads. It has a standard accessory rail for mounting additional accessories, including a traction set.
Supports the head in a prone and supine position. It has two pivot points, and the head support is made of PUR and is compatible with gel pads. The adjustment is done using a quick-release lever, the movement of which blocks all connections simultaneously.
The horseshoe headrest made of aluminum does not have a mattress, which allows you to position the patient in a prone and supine position. It has three pivot points, of which two are adjustable simultaneously with a quick-release lever and the third with a knob. The headrest is compatible with gel pads. The asymmetrical shoulder allows better access to the patient’s neck and head and the use of the C-arm.
Supports the head in the prone, supine, and lateral position has two PUR mattresses, adjustable in width. It offers three pivot points that allow you to adjust the height, angle, and longitudinal tilt. After removing the mattresses, they can be used as an additional holder for accessories. The headrest offers a large amount of space for the anesthetic mask, intubation cables and other anesthetic equipment
Supports the head in the prone, supine, and lateral position, and has two pivot points, which are operated by a quick-release lever, whose movement blocks all connections simultaneously. Dimensions 190 x 235 mm – free access to the patient from both sides, can be used as an ENT headrest. It offers the possibility of moving it away from the tabletop or rising above it. The mattress can be removed for disinfection.
Supports the head in the prone, supine, and lateral position, and has three pivot points, which allows you to fully adjust the position for a specific procedure. Dimensions 190 x 235 mm – free access to the patient from both sides, can be used as an ENT headrest. It offers the possibility of moving it away from the tabletop, raising it above the table, or using it as support (adjustable to an angle of 90°). The mattress can be removed for disinfection.
Headrests
Supports the patient’s head in a prone and supine position. The headrest has two mattresses with independent height and distance adjustment. The frame is equipped with an adapter for the traction handle or other accessories. The construction is very stiff and stable thanks to the solid frame and height-adjustable support with an articulated tip.
The handle mounted to the headrest allows the attachment of a traction cable, which is used to stretch the cervical spine during surgery. The lift is made of durable steel, which ensures high stiffness even during high loads. It has an adjustable arm angle. Note: a compatible headrest is required for installation.
Serves as a support for the surgeon’s hands during surgery – both in standing and sitting positions. A comfortable mattress and adjustable height and inclination of the support ensure great comfort even during procedures that take many hours to perform. Thanks to the ball joints, the support can be placed centrally over the patient’s head or directed more to the left or right.
The headrest for the supine position is used to support the patient’s head during surgery. It also allows additional lift or angle of the patient’s head to reveal the treatment area. 80 mm thick, dimensions 240 x 220 mm. The headrest is translucent for X rays.
In the supine position, the polyurethane half roll allows an additional elevation of the cervical spine and exposes the treatment field. It also stabilizes the patient’s body during surgery. 80 mm thick, 160 x 420 mm. It can be used as a positioner for other parts of the body, e.g. the knee joint. The half roll is translucent for X-rays.
Headrest with an additional second pivot point that allows you to elevate the spine or replace positioners under the patient’s head (especially in the lateral position). It has a mattress that can be removed for disinfection and a double lever for setting the desired position.
Non-invasive and pin
Horseshoe Headrest is a high-quality headrest for noninvasive positioning of the patient’s head. Horizontal and vertical adjustment allows you to choose the right position on the operating table. The offer includes horseshoe headrests intended for both adults and pediatric patients, as well as those that allow performing procedures requiring intraoperative imaging (X-ray translucent).
QR3 Headrest System is a comprehensive system created for skull surgery requiring high-quality tools ensuring precision and safety. Single or reusable pins for pediatric or adult patients keep the skull in the required position. The high-quality aluminum construction makes the QR3 the most popular skull stabilization system on the market. LUCENT® Headrest System is a fully translucent attachment used to stabilize the skull, including cervical spine surgery. The steel-free clamp allows angiography, fluoroscopy, CT, skull or cervical spine surgery using the C-arm.
QR3 Headrest System Teflon® is a Teflon-coated system for neurosurgical operations created for the comfort of doctors and patient safety. The Teflon layer allows placing the set in an autoclave chamber. It is a complete head support system that is compatible with WHO Infection Control Guidelines. Quick-Rail® technology allows easy attachment of accessories.
Positioners, accessories, clamps
A set of additional accessories for the QR3 Headrest System (1001.100) that facilitate positioning of the patient in the lateral position. It allows the patient to rest his arm and fix it below the tabletop, offering greater stability during surgery.
The transverse adapter (3007-00) is used to position the patient’s head in the DORO® adapter in a sitting position. Connects the base of the attachment to the operating table, allowing better access to the patient’s head or spine. For the convenience of use, we recommend buying together with a table with a backrest adjustable by remote control. The adapter is mounted on the table’s accessory rails on the sides of the countertop. For assembly, two multi-position clamps WS-17.9 should be purchased.
The support (3012-00) for cervical spine surgery, stabilizes the patient and allows the cervical vertebrae to be elevated, it is mounted on the 3011-00 adapter with integrated clamps.
The wide range of skull clamps require different support pins. Reusable pins are available:
– stainless steel (for adults 3005-00, pediatric 3004-00)
– titanium for imaging (for adults 3005-50, pediatric 3004-50).
Disposable pins (sets, e.g. 36 pieces) are available in versions:
– stainless steel (for adults 3006-00 or 3006-50, pediatric 3006-10),
– titanium (for adults 3006-20, pediatric 3006-30).
Enquiry Now